Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
2. Remove the J 34730-1A Fuel Pressure Gauge (1) from the J 42982 Fuel Pressure Gauge Adapter (2).
3. Disconnect the J 42982 Fuel Pressure Gauge Adapter quick connect coupling from the fuel feed pipe of the fuel rail using the J 43178 Prizm Fuel
Line Quick Connect Separator. Use a shop towel to catch any remaining fuel that may leak.
4. Disconnect fuel feed hose quick connect coupling from the J 42982 Fuel Pressure Gauge Adapter and remove the adapter. Use a shop towel to
catch any remaining fuel that may leak.
5. Connect the fuel feed hose quick connect fitting (1) to the fuel feed pipe (2) of the fuel rail.
6. Install the fuel teed hose quick connect coupling cover.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Connect the negative battery cable.
Tighten
Tighten the negative battery cable terminal retainer to 15 N.m (11 lb ft).
8. Turn ON the ignition in order to pressurize the fuel system.
9. Turn OFF the ignition.
10. Check for any fuel leaks.