Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Tank Pressure Sensor Replacement
Removal Procedure
1. Remove the EVAP canister (5).
2. Disconnect the fuel tank pressure sensor electrical connector.
3. Disconnect the fuel tank pressure hose (3) from the EVAP Pressure Switching Solenoid (4).
4. Remove the one bolt (1).
5. Remove the fuel tank pressure sensor (2) from the EVAP canister.
Installation Procedure
1. Install the fuel tank pressure sensor (2) to the EVAP canister.
2. Secure with one bolt (1).
3. Connect the fuel tank pressure sensor electrical connector.
4. Connect the fuel tank pressure hose (3) to the EVAP Pressure Switching Solenoid (4).
5. Install the EVAP canister (5).
