Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Ignition Coil: Service and Repair
Repair Instructions
REMOVAL PROCEDURE
The ignition coil and the ignition control module are 1 unit and are serviceable by replacement only.
1. Disconnect the spark plug wires from the ignition coils.
2. Disconnect the two connectors from the ignition coils.
3. Remove the four bolts (2) from the cylinder head.
4. Remove the two ignition coils (1) from the cylinder head.
INSTALLATION PROCEDURE
1. Install the two ignition coils to the cylinder head.
NOTE: Refer to Fastener Notice in Cautions and Notices.
