Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Fuel Level Sensor: Service and Repair
Installation Procedure
Installation Procedure
Notice: Always re-attach the fuel lines and fuel filter with all original type fasteners and hardware. Do not repair sections of fuel pipes.
1. Position the new fuel sender assembly O-ring (2) on the fuel sender assembly (1).
2. Install the fuel sender assembly (1) into the fuel tank (3).
3. Install the fuel sender assembly hold down plate (1).
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Secure the fuel sender assembly hold down plate with eight bolts (2).
Tighten
Tighten the fuel sender assembly hold down plate bolts to 4 N.m (53 lb in).