Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor Replacement
Removal Procedure
1. Disconnect the VSS electrical connector (1).
2. Remove the one bolt (2).
3. Remove the VSS from the transmission.
4. Inspect the VSS O-ring for cuts or damage. Replace as necessary.
Installation Procedure
1. Apply J 36850 or equivalent to the VSS O-ring.
2. Install the VSS into the transmission.
Notice: Refer to Fastener Notice in Cautions and Notices.