Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Control Module HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the I/P compartment.
3. Disconnect the A/C compressor control module electrical connector.
4. Remove the two screws and the A/C compressor control module (1).
Installation Procedure
1. Install the A/C compressor control module (1) and secure with the two screws.
2. Connect the A/C compressor control module electrical connector.
3. Install the I/P compartment.
4. Connect the negative battery cable.