Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Air Bag Control Module: Service and Repair
Removal Procedure
1. Disable the SIR system. Refer to Disabling the SIR System. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and Arming/Disabling the SIR System
2. Remove the console in order to access the SDM (1).
3. Remove the PCM. Refer to PCM Replacement.
4. Remove the under seat duct.
5. Remove the SDM electrical connectors.
6. Remove the three SDM fasteners (2).
7. Remove the SDM assembly (1) from the vehicle.
