Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Seat Belt Buckle: Service and Repair
Seat Belt Buckle Replace
Removal Procedure
1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
2. Remove the following components from the vehicle:
^
The anchor bolt
^
The rear seat belt buckle (1)
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices. See: Seat Belt Tensioner/Service Precautions
1. Install the rear seat belt buckle (1) to the vehicle. Secure the buckle with the anchor bolt.
Tighten
Tighten the rear seat belt buckle anchor bolt to 42 N.m (31 lb ft).
2. Install the rear seat cushion. Refer to Seat Cushion Replacement Rear in Seats.