Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Power Mirror Switch: Service and Repair
REMOVAL PROCEDURE
Power Mirror Switch Replacement: Removal Procedure
1. Disconnect the negative battery cable.
2. Using a taped flat bladed tool, gently pry and release the four clips around the lamp dimmer switch/remote control rearview mirror switch trim
plate (2).
Power Mirror Switch Replacement: Removal Procedure
3. Disconnect the outside remote control rearview mirror switch electrical connector (1).
4. Remove the outside remote control rearview mirror switch from the trim plate by depressing the four tabs.
INSTALLATION PROCEDURE
Power Mirror Switch Replacement: Installation Procedure
1. Connect the outside remote control rearview mirror switch electrical connector (1).
