Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
1. Install the cruise control switch (3) to the vehicle. Secure the switch with the three screws (4).
2. Install the right horn contact (2) to the steering wheel. Secure the contact with the two allen head bolts.
Tighten
Tighten the horn contact bolts to 8.8 N.m (78 lb in).
Cruise Control Switch Replacement: Removal Procedure
3. Install the red/blue wire (2) to the cruise control switch electrical connector (1).
4. Close the TPA on the top of the cruise control switch electrical connector.
5. Connect the cruise control switch electrical connector (1) to the steering wheel inflatable restraint module coil.
6. Install the steering wheel inflatable restraint module.
7. Connect the negative battery cable.
