Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
5. Install the fuel pipe (2) to the fuel sender fitting.
6. Secure the fuel pipe (2) with the retaining clip (1).
7. Connect the fuel sender assembly electrical connector (1).
8. Connect the negative battery cable.
Tighten
Tighten the negative battery cable terminal retainers to 15 N.m (11 lb ft).
9. Pressurize the fuel system and check for leaks.
10. Inspect the fuel sender access panel (1) butyl caulk seal.
11. Replace any missing butyl caulk as necessary.
12. Install the fuel sender assembly access panel (1) to the rear seat floor.
13. Install the rear seat bottom cushion.
