Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
7. Measure the resistance between the armature core and the commutator using the J 39200. If the resistance is 5.0 ohms or less, the armature is
grounded. Replace the armature.
8. Measure the resistance between the commutator segments using the J 39200. If the resistance is not 5.0 ohms or less at any test point, there is an
open circuit in the commutator. Replace the armature.
9. Measure the positive brush (1) length using the J 26900-5. The standard brush length is 15.5 mm (0.610 in). If the brush length is less than 10.0
mm (0.394 in), replace the brush holder.