Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
13. Remove the 6 bolts and the RH lower engine splash shield (1).
14. Remove the 6 bolts and the LH lower engine splash shield.
15. Remove the following components from the vehicle:
^
The exhaust manifold pipe drive shaft heat shield
^
The one nut
^
The two bolts
16. Remove the front wheel and tire assemblies. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS.
17. Remove the 2 outer tie rods. Refer to TIE ROD END REPLACEMENT - OUTER.
18. Remove the two nuts (4,6) and the front suspension crossmember brace (5).
19. Remove the front suspension crossmember (7), the bans support (6), the 2 control arms (8,9), and the front stabilizer shaft (if equipped) together as
a unit in order to gain access to the steering gear. Refer to FRONT SUSPENSION CROSSMEMBER REPLACEMENT in FRONT
SUSPENSION.
20. Remove the rear transaxle mount through bolt and the rear transaxle mount.
