Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
2. Install the steering wheel retaining nut (2).
Tighten
Tighten the nut to 34 Nm (25 ft. lbs.).
3. Install the horn electrical connector.
4. If the vehicle is equipped with cruise control, install the cruise control electrical connector.
5. Install the inflator module (1). Refer to INFL RST STEERING WHEEL MODULE REPLACEMENT.
6. Check the steering wheel center point.
7. Enable the SIR system. Refer to ENABLING THE SIR SYSTEM in SIR.
