Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Shift Interlock Solenoid: Service and Repair
3 Speed-MB3 Automatic Transmission
REMOVAL PROCEDURE
1. Remove the negative (-) battery cable.
CAUTION: Refer to Battery Disconnect in Service Precautions.
2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Warning Indicators.
3. Remove the key lock solenoid electrical connector from the key lock solenoid (1).
4. Remove the 2 screws (1) and the key lock solenoid from the ignition switch (2).
INSTALLATION PROCEDURE