Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Overdrive Switch: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 38125-B Terminal Repair Kit
1. Remove the manual selector from vehicle. Refer to Manual Selector Replacement.
2. Remove the OVERDRIVE switch/manual selector illumination lamp electrical connector (2) from the rear of the manual selector.
3. Using the terminal removal tool from J 38125-B, open the Terminal Position Assurance (TPA) (1) on the side of the OVERDRIVE switch/manual
selector illumination lamp electrical connector (2).
4. Using the terminal removal tool from J 38125-B, remove the two white OVERDRIVE switch wires (2) from the OVERDRIVE switch/manual
selector illumination lamp electrical connector (1)
