Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
1. Install the key lock solenoid into the ignition switch (2). Secure the ignition switch with two screws (1).
2. Install the key lock solenoid electrical connector (1) to the key lock solenoid.
3. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Warning Indicators.
IMPORTANT: Upon completion of the key lock solenoid installation, perform the following steps in order to ensure proper operation:
^
With the manual selector lever in the Park position, you can turn the ignition switch from ACC to LOCK position and you can remove the
ignition key from the ignition switch.
^
With the manual selector in any position other than Park position, you cannot turn the ignition switch from ACC to LOCK position.
4. Install the negative (-) battery cable.
