Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
5. Unhook the two white OVERDRIVE switch wires (1) from the clip (2) on the underside of the manual selector base (3).
IMPORTANT: When removing the manual selector knob, lift up slowly and first remove the manual selector button, return the spring retainer
and return the spring.
6. Remove the 2 screws, the manual selector knob, and the manual selector lever sleeve from the manual selector lever. Simultaneously feed the two
white OVERDRIVE switch wires through the shift indicator.
7. Remove the OVERDRIVE switch (2) from the manual selector knob (1).
INSTALLATION PROCEDURE
1. Install the OVERDRIVE switch (2) into manual selector knob (1).
2. Install the manual selector lever sleeve and the manual selector knob onto the manual selector lever. Simultaneously feed the 2 white
OVERDRIVE switch wires through the shift indicator. Secure with 2 screws.
