Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Window Regulator: Service and Repair
Window Regulator - Front Door
REMOVAL PROCEDURE
1. Remove the front door window.
2. Disconnect the power window motor electrical connector (2), if equipped.
3. Remove the following components from the door:
^
The five bolts (4)
^
The nut (3)
^
The window regulator (1)
INSTALLATION PROCEDURE
1. Apply a multipurpose grease to all lubrication and sliding points.
2. Install the window regulator (1) to the door. Secure the regulator with the five bolts (4) and the nut (3).
Tighten
Tighten the regulator bolts and nut to 8 N.m (71 lb in).
3. Connect the power window motor electrical connector (2), if equipped.
4. Install the front door window.
