Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
5. Remove the following components from the steering column:
^
The steering column upper trim cover screw (3)
^
The steering column upper trim cover (2)
6. Disconnect the wiper/washer switch electrical connector (2).
7. Remove the following components from the steering column:
^
The two screws (1)
^
The wiper/washer switch (3)
INSTALLATION PROCEDURE
1. Install the wiper/washer switch (3) to the steering column. Secure the switch with the two screws (1).
2. Connect the wiper/washer switch electrical connector (2).
