Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL PROCEDURE
1. Remove the two lower plastic retainers that secure the hood insulator. Fold back the bottom of the hood insulator (4) in order to gain access to the
windshield washer nozzle hose (1) and the rear of the windshield washer nozzle (2).
2. Remove the hose (1) from the nozzle (2).
3. Press together the nozzle retaining tabs.
4. Remove the nozzle (1) from the hood (2).
INSTALLATION PROCEDURE
1. Fully seat the nozzle (1) in the hood (2). Ensure that the retaining tabs expand.