Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Wiper Motor Linkage: Service and Repair
REMOVAL PROCEDURE
1. Remove the air inlet screen.
2. Remove the six bolts which secure the windshield wiper transmission (1) to the bulkhead (2).
3. Remove the windshield wiper motor.
4. Slide the wiper transmission (1) through the hole at the far left of the bulkhead.
INSTALLATION PROCEDURE
1. Slide the windshield wiper transmission (1) into the hole at the far left of the bulkhead.
2. Install the windshield wiper motor.