S10/T10 Blazer 2WD L4-121 2.0L VIN Y 2-bbl (1983)
Cruise Control Servo Cable: Adjustments
1983-84 Models
With carburetor throttle completely closed (ignition ``Off'' and fast idle cam off), loosen cable adjustment jam nuts. On 4-122 models, position cable
so cable sleeve at carburetor is tight but not holding throttle open. On 4-119 and V6-173 models, position cable so a 1.0 mm clearance exists between
throttle lever stud and end of cable slot. On all models, tighten jam nuts.