S10/T10 Blazer 2WD L4-121 2.0L VIN Y 2-bbl (1983)
Alignment: Service and Repair
Front Toe Adjustment
Fig. 2 Tie rod clamp & sleeve positioning
(Figure 3) Tie rod clamp & sleeve positioning
-
To adjust, loosen clamp bolts at each end of steering tie rod adjustable sleeves.
-
With steering wheel in straight ahead position, turn tie rod adjusting sleeves to obtain proper adjustment.
-
After adjusting, check that number of threads showing on each end of sleeve are equal and that the tie rod end housings are at the right angles to
steering arm.
-
Position tie rod clamps and sleeves, Figs. 2 and 3, and torque nuts to 15 ft. lbs.