S10/T10 Blazer 2WD L4-151 2.5L (1988)
Condenser HVAC: Service and Repair
Figure 29 - Condenser Replacement
REMOVE OR DISCONNECT (Figure 29)
1. Refrigerant from the system.
2. Upper fan shroud.
3. Radiator.
4. Shields at either side of the radiator support.
5. Condenser retainers (121) and insulators (120).
6. Condenser lines (110 and 111).
7. Condenser (21).
INSTALL OR CONNECT (Figure 29)
1. Condenser (2).
2. Condenser retainers (121) and insulators (120).
^
Tighten-Mounting bolts (122) to 6 Nm (62 in. lbs.).
3. Condenser lines (110 and 111) to the condenser (2).
^
Tighten-Nuts (110 and 111) to 24 Nm (18 ft. lbs.).
4. Radiator.
5. Upper fan shroud.
6. Refrigerant to the system.
7. Evacuate, charge and leak test.