S10/T10 Blazer 2WD V6-262 4.3L VIN W CPI (1992)
6. Crankshaft sprocket, if necessary.
-
Use J 5825-A (figure 43).
Installation
1. Crankshaft sprocket, if removed.
2. Balance shaft drive gear, camshaft sprocket and timing chain.
3. Camshaft sprocket bolts and nut.
Tighten Camshaft sprocket bolts and nut to 28 N.m (21 ft. lbs.).
4. Timing cover.
5. Torsional damper.
