S10/T10 Blazer 2WD V6-262 4.3L VIN W CPI (1992)
Blower Motor Resistor: Service and Repair
Without A/C
Wiring Harness Installation
Blower Motor Case Assembly
REMOVE OR DISCONNECT
1. Electrical connection (78) from resistor (80).
2. Screws (79).
3. Resistor (80) from blower case (49).
INSTALL OR CONNECT
1. Resistor (80) to blower case (49).
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
2. Screws (79).
-
Tighten screws (79) to 2 Nm (18 in. lb.).