S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Front Door Panel: Service and Repair
Front Door Trim Panel
Tool Required: J 38778 Trim Panel Remover
Remove or Disconnect
1. Door handle bezel.
2. Window regulator handle (if equipped).
3. Power accessory switch mounting panel (if equipped with power accessories).
4. Handle bezel screw. Carefully pry off trim panel armrest screw cover with a flat blade tool to access screw.
5. Trim panel from the door. Pry the retainers from their seats using J 38778.
Install or Connect
1. Trim panel to the door.
2. Window regulator handle (if equipped).
3. Power accessory switch mounting panel (if equipped with power accessories).
4. Handle bezel screw.
5. Tighten trim panel armrest screw.
6. Door handle bezel.