S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Blower Motor Resistor: Service and Repair
Without A/C
Blower Motor Case Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connectors, as necessary.
3. Screws (79).
4. Blower motor resistor (80).
INSTALL OR CONNECT
1. Blower motor resistor (80).
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
2. Screws (79).
-
Tighten screws (79) to 1.1 Nm (10 lbs. in.).
3. Electrical connectors, as necessary.
4. Negative battery cable.
-
Check circuit operation.