S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Fuel Meter Cover Replacement (TBI 220)
Install or Connect
1. New pressure regulator seal, fuel meter outlet passage gasket, and cover gasket.
2. Fuel meter cover assembly.
3. Attaching screw assemblies, precoated with appropriate locking compound to threads. (Short screws are next to injectors.)
TIGHTEN:
^
Screw assemblies to 3.0 Nm (28.0 lb. in.).
4. Electrical connectors to fuel injectors.
5. With engine "OFF," and ignition "ON," check for leaks around gasket and fuel line couplings.