S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Wiper Switch: Service and Repair
WARNING: Refer to Air Bags and Seat Belts/ Air Bags (Supplemental Restraint Systems)/ Service and Repair/ Air Bag System Disarming &
Arming.
1. Remove ignition lock.
2. Remove shift lever clevis, then the lever from vehicle.
3. Remove wire harness straps, then disconnect steering column bulkhead connector from vehicle wire harness.
4. Disconnect turn signal switch gray and black connectors from column bulkhead connector.
5. Remove pan head tapping screws, then the turn signal switch assembly from column.
6. Reverse procedure to install. Torque pan head tapping screws to 53 inch lbs.
