S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
4. With the palm of the hand, remove the sunroof window from the top of the slider arms.
INSTALLATION PROCEDURE
1. With the palm of the hand, position the sunroof window to the slider arm.
IMPORTANT: The sunroof window is self locating to the slider arm.
2. Install the 4 sunroof window screws (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the sunroof window screws to 4 N.m (35 lb in).
3. Close the sunroof window.
4. Inspect the fit of the sunroof window to the outer periphery of the sunroof panel window seal.