S10/T10 Blazer 4WD V6-262 4.3L (1989)
Wiper Switch: Service and Repair
Rear Wiper/Washer Switch
REMOVE OR DISCONNECT
1. Battery ground cable from the battery.
2. Screw (4) from the instrument panel.
3. Switch trim plate (3) from the instrument panel.
4. Connector (1) from the switch (2).
5. Switch (2) from the trim plate (3).
INSTALL OR DISCONNECT
1. Switch (2) to the trim plate (3).
2. Connector (1) to the switch (2).
3. Switch trim plate (3) to instrument panel.
4. Screw (4) to the instrument panel.
5. Battery ground cable to the battery.