S10/T10 Blazer 4WD V6-262 4.3L VIN W CPI (1992)
Body Emblem: Customer Interest
Exterior Trim - Liftgate Nameplate Peel
Number:
92-146-10
Section:
10
Date:
MARCH 1992
Corporate Bulletin No.: 161513R
ASE No.: B1
Subject:
ENDGATE NAMEPLATE PEEL
Model and Year:
1986-92 S/T TRUCKS WITH SPARE TIRE CARRIER
Some 1986-1992 S/T utility vehicles equipped with a spare tire carrier (RPO P16) may experience the paint on the endgate nameplate peeling. This
condition can occur as a result of poor paint adhesion. To correct this condition, the nameplates have been redesigned. The redesigned nameplates can be
installed using the following part numbers.
These changes were made in production vehicles after the following VIN Breakpoints:
Assembly Plant
VIN
Pontiac West (0)
1GNCT18Z1N0100040
Moraine (2)
1GNDT13Z2M2315179
Vehicles built before these VIN Breakpoints have endgates with stud mounting holes and use the following part numbers:
The original nameplate (P/N 15530789) was diecast chrome and black paint with mounting studs. It has been replaced with a new nameplate (Kit P/N
15661699) with mounting studs which is diecast with chrome and has black tape instead of paint.
Vehicles built after these VIN Breakpoints have endgates which were built without stud mounting holes. The nameplates are self-adhering and use the
following part numbers:
Nameplate P/N 15675118 is chrome and has no mounting studs. This nameplate has adhesive backing and is approximately 12" long.
SERVICE PARTS INFORMATION
For vehicles built before the VIN Breakpoints:
Part Number
Description
15661699
Endgate Nameplate - Chevrolet
For vehicles built after the VIN Breakpoints:
Part Number
Description
15675118
Endgate Nameplate - Chevrolet
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles under warranty use:
Labor Operation:
B8900
Use applicable labor time guide for labor hours.