S10/T10 Blazer 4WD V6-262 4.3L VIN W CPI (1992)
Intake Manifold: Technical Service Bulletins
Engine - Revised Upper Intake Manifold Torque Specs
Number: 92-313-6E
Section: 6E
Date: OCT. 1992
Corporate Bulletin No.: 266501
ASE No: A1, A8
Subject:
UPPER INTAKE MANIFOLD FASTENER TORQUE SPECIFICATIONS
Model and Year:
1992 S/T AND M/L TRUCKS WITH 4.3L ENGINE
SERVICE UPDATE
The following represents new and/or revised information for Section 4 at the rear of ST 369-92 (S/T) or ST 372-92 (ASTRO VAN) Service Manuals.
This information replaces the torque specification (upper intake manifold bolts and studs) found under UPPER INTAKE INSTALLATION on pages
4-79 and 4-80 in ST 369-92 (S/T) and ST 372-92 (ASTRO VAN) Service Manuals.
The torque specification for the 4.3L (VIN W - RPO L35) engine upper intake manifold bolts and studs is 10 N-m (88 lbs.in.).