S10/T10 Blazer 4WD V6-262 4.3L VIN W CPI (1992)
Compressor Clutch: Service and Repair
With SD-709 Compressor
Compressor Components
Remove or Disconnect
Tool Required:
J 4245 Internal Snap Ring Pliers
J 6435 External Snap Ring Pliers
J 8433 Puller Set
J 37825 Puller Plate Assembly
J 37827 Puller Pilot
J 37828 Puller Fingers
J 37872 Spanner Wrench
Removing The Nut
-
Insert the two pins of the J 37872 into any two threaded holes of the clutch front plate (2). Hold the clutch plate stationary.