S10/T10 Blazer 4WD V6-262 4.3L VIN W CPI (1992)
B. Push the diaphragm in to release the cable end.
C. Squeeze the two locking fingers of the cable ferrule with pliers. Then pull the cable from the bracket.
2. Raise the vehicle and support with safety stands.
3. Bolts (6).
-
DO NOT unscrew the coupling nut (132) at this time.
4. Shift cable housing (11) from the carrier assembly. Pull out about 20 mm (3/4 inch).
5. Cable end from the shift fork shaft (17). Bend the tang of the locking spring (137), then pull the cable end from the shift fork shaft.
6. Shift cable (10) from the shift cable housing (11) by unscrewing the coupling nut (132).
7. Shift cable from the vehicle.
Shift Cable
