S10/T10 Blazer 4WD V6-262 4.3L VIN Z (1994)
Installing Clutch Coil Assembly
5. When coil is fully seated on the front head, use a 1/8" diameter drift punch and stake the front head at three (3) places 120° apart. to ensure clutch
coil remaining in position.
Staking Clutch Coil To Front Head
-
Stake size should be only one half the area of the punch tip and only approximately 0.28-0.35mm (0.01-0.015") deep.
6. Install rotor and bearing assembly and the clutch plate and hub assembly according as described previously.