S10/T10 Blazer 4WD V6-262 4.3L VIN Z (1994)
Wheel Bearing: Service and Repair
Front
FRONT WHEEL BEARINGS AND/OR HUB
Remove or Disconnect
Tools Required:
J 28733-A Front Hub Spindle Remover
J 24319-01 Universal Steering Linkage Puller
J 28712 Axle Shaft Boot Seal Protector
J 36607 Ball Joint Separator
Raise the vehicle and support with safety stands.
Unload the torsion bar.
1. Tire and wheel.
Note: Install J 28712 to the tripot axle joint (fig. 44).
2. Cotter pin (122).
3. Retainer (121).
4. Nut (120).