S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Fig 43, Center Instrument Panel Sound Insulator
REMOVE OR DISCONNECT
1. Screws that retain the instrument panel sound insulator to the knee bolster, instrument panel, heater assembly, and floor duct.
2. Instrument panel sound insulator from the vehicle.
INSTALL OR CONNECT
1. Instrument panel sound insulator to the vehicle.
2. Screws that retain the instrument panel sound insulator to the knee bolster, instrument panel, and floor duct.
TIGHTEN
^
Screws to 1.9 Nm (17 lb in).
3. Screw that retains the instrument panel sound insulator to the heater assembly.
TIGHTEN
^
Screw to 1.5 Nm (13 lb in).
RIGHT SIDE
