S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Keyless Entry Module: Service and Repair
Remote Control Door Lock Receiver
REMOVE OR DISCONNECT
1. Left-side instrument panel sound insulator.
2. Electrical connector.
3. Retainer.
4. Remote control door lock receiver from the instrument panel sound insulator.
Remote Control Door Lock Receiver
INSTALL OR CONNECT
1. Remote control door lock receiver to the instrument panel sound insulator.
2. Retainer.
3. Electrical connector.
4. Left-side instrument panel sound insulator.
5. Reprogram the transmitters.
6. Check the operation of the system.
