S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Brake Hose/Line: Service and Repair
Rear Hose
Rear Brake Hose Retainer
REMOVE OR DISCONNECT
1. Brake pipe fittings.
2.Retainer.
3. Bolt.
4. Brake hose.
Attaching Rear Brake Hose
INSTALL OR CONNECT
1. Brake hose.
Note:The hose must not be twisted.
2. Bolt.
^
Tighten bolt to 17 Nm (13 ft. lbs.).
3. Retainer.
4. Brake pipe fittings.
^
Tighten pipe fittings to 29 Nm (21 ft. lbs.).
5. Bleed brakes. Refer to Hydraulic System Service and Repair.
NOTE: The hose must not be twisted or come in contact with any suspension components after installation.