S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Remove or Disconnect
1. Air distributor duct. Refer to Air Distributor Duct.
2. Vacuum connectors, as necessary.
3. Windshield defroster nozzle screws.
4. Windshield defroster nozzle from heater assembly.
Install or Connect
1. Windshield defroster nozzle to heater assembly.
2. Windshield defroster nozzle screws.
Tighten
-
Screws to 2 N.m (18 lb in).
3. Vacuum connectors, as necessary.
4. Air distributor duct. Refer to Air Distributor Duct.
