S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
6. Screws that retain the CHMSL to the roof.
Tighten
-
CHMSL screws to 1.4 N.m (12 lb in).
Utility - Endgate Window-Mounted
Remove or Disconnect
1. Screws that retain the CHMSL to the endgate window.
2. CHMSL from the vehicle.
3. Electrical connector.
-
Pull the rubber grommet from the body at the top of the endgate opening.
-
Pull the electrical connector through the hole in the body and disconnect.
Install or Connect
4. Electrical connector.
-
Connect the electrical connector and push it through the hole in the body.
-
Insert the rubber grommet into the hole, making sure that it is properly seated.
5. CHMSL to the vehicle.
6. Screws that retain the CHMSL to the endgate window.
Tighten
-
CHMSL screws to 1.4 N.m (12 lb in).