S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Turn Signal Bulb: Service and Repair
Description
Remove or Disconnect
-
Make sure the headlamp switch is in the OFF position.
-
Make sure the ignition switch is in the LOCK position.
1. Bulb and socket from the front turn signal lamp.
A. Squeeze the socket retainer to unlock the socket.
B. Rotate the socket 1/4 turn counterclockwise to remove.
2. Bulb from the socket.
Install or Connect
1. Bulb to the socket.
2. Bulb and socket to the front turn signal lamp.
A. Insert the socket and rotate it 1/4 turn clockwise to install.
B. Make sure that the socket retainer locks in place.