S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Fluid Filter - A/T: Service and Repair
Automatic Transmission Fluid and Filter Replacement
Removal Procedure
Tools Required
J 36850 Transmission Assembly Lube
1. Raise the vehicle.
2. Support the vehicle with safety stands.
3. Remove the upper and lower underbody braces, if equipped.
4. Place the drain pan under the transmission oil pan.
Notice: When removing the oil pan bolts, be careful not to damage the oil pan sealing surfaces. Such damage may result in oil leaks in this area.
5. Remove the oil pan bolts from the front and sides only.
6. Loosen the rear oil pan bolts approximately 4 turns.
7. Lightly tap the oil pan with a rubber mallet or pry gently in order to allow the fluid to drain.
