S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Seat Belt: Service and Repair
Rear Seat Center Belt Replacement
Removal Procedure
Removal Procedure
1. Fold the rear seats forward.
2. Lift the rear seat floor tiller trim panels in order to access the rear seat belt buckle and retractor assembly.
3. Remove the nut that retains the seat belt buckle and retractor assembly to the vehicle.
4. Remove the seat belt buckle and retractor assembly from the vehicle.
Installation Procedure
Installation Procedure
1. Install the seat belt buckle and retractor assembly to the vehicle.
2. Install the nut that retains the seat belt buckle and retractor assembly to the vehicle.
Tighten
Tighten the seat belt buckle and retractor assembly nut to 80 N.m (59 lb.ft.).
3. Reposition the rear seat floor filler trim panels.
4. Reposition the rear seats.