S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor (4WD)
REMOVE OR DISCONNECT
1. Raise Vehcile.
2. Tire and wheel.
3. Brake Caliper.
4. Rotor.
5. Wheel speed sensor cable electrical connector.
6. Sensor wire mounting clip from upper control arm.
7. Sensor and splash shield assembly.
8. Clips from sensor wire.
INSTALL OR CONNECT
1. Clips on sensor wire.
^ Locate clips at the paint spots on the sensor wire.
2. Sensor and splash shield assembly.
3. Sensor connector.
4. Hub, bearing, and brake rotor.
5. Brake caliper.
6. Tire and wheel.