S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Front Steering Knuckle: Service and Repair
REMOVE OR DISCONNECT
^
Tools Required:
-
J 24319-B Tie Rod End Puller
-
J 34026 Bail Joint Separator
Raise the vehicle and support with safety stands. Unload the torsion bar.
1. Tire and wheel.
2. Drive axle nut. Insert a drift or large screwdriver through brake caliper into rotor vanes to prevent from turning.
3. Washer.
4. Brake Caliper. Refer to Brakes and Traction Control.
Important Support the caliper with a piece of wire to prevent damage to the brake hose.
