S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Stabilizer Bar: Service and Repair
Rear Suspension
REMOVE OR DISCONNECT
Raise the vehicle on a hoist.
1. Lower nuts, washers and bolts from stabilizer links.
2. Nuts from U-bolts.
3. U-bolts, clamps, and insulators.
4. Stabilizer bar.
INSTALL OR CONNECT
1. Stabilizer bar to rear axle.
2. Insulators, clamps, and U-bolts.
3. Nuts to U-bolts.
-
Tighten nuts to 60 Nm (44 ft. lbs.).